Walls, floors, lights, and an amusing purchase.

Not a whole lot of time to work on minis this week - my day job has been crazy busy, and I've been exhausted at night, far too tired to build or paint or anything of the sort.

 

Here's where we left off with Grandma's Summer House. Tonight I started Mod Podging the floors. The unpapered floors will be carpeted. 

 

 

 

These are the side walls. I've painted the wood in the windows twice with buttercream acrylic craft paint (buttercream being the color). Clockwise, starting top left, it's bathroom, bedroom, kitchen, living room.

 

Here is the front wall. The middle section is the hallway, first and second floor. 

 

These are the half-scale lights I have acquired. I'm still trying to decide which rooms they'll go in, and which rooms I'll have to make lights for. At $9-$20 per light, I do not have the budget to buy another 5 or 6 lights. I certainly didn't pay that much for the ones I have, but it's taken me two years to get the ones I have. I can't count on such good deals coming along before May, when this house must be finished. I will challenge myself to make lights, and it will be a good experience. If it's an unsuccessful experience, no big deal - I'll just figure something out.

 

 

I do plan to put the Tiffany table lamp in the living room. It occurs to me that there are no overhead living room lights in any of the houses I am familiar with. I'll need at least one more table or floor lamp for that room.

 

The kitchen will probably need two hanging lamps. I'd ideally like a ceiling light in each hallway; one in the bathroom; ceiling and table lamps in the bedroom; and two or more lights in the attic/guest rooms. Maybe one on the attic stairway to the roof, also.

 

A minimum of 12 lights, and I've currently got 5.

 



 

 

 

 

This is an Ebay buy - and when I saw it, I knew I had to have it. There's a small acrylic paint bottle holding it up, which may give some idea of the size. It's far too big for half scale, but I think it will fit nicely in the Glencroft - maybe over the living room fireplace.

 



 

Anyone over the age of 35 related to me on the Bushey side of the family will understand why I had to have this.

 

I'm feeling pretty good about how this house for the Undersized Urbanite contest is coming along. I'm still doing a lot of thinking and planning - how to install the lights, which pieces to do first, etc.

 

I must say, I do like the laser cut house kit. Except for the warping - which is likely my own fault: I should have taken the kit out of its box and wrapping when I got it a year ago. The only other quirk is that where it's been laser cut, it has darker edges that do take extra painting to cover. Well worth it to avoid all that sanding with the die cut kits.

 

Slowly but surely.

More work on Grandma's Summer House.

 

I dug through my paper stash to find suitable patterns. I decided to either carpet or linoleum most of the floors; I'm going to electrify this house, and will be running wire either on the ceilings or on the floors.

 

 

So I was thinking, left to right:

 

Living Room walls

Kitchen walls

Kitchen floor

Bathroom walls

Bathroom floor

Bedroom walls

Hallway walls

Attic walls

 

 

The living room, bedroom, and attic will be carpeted. The hall floors I decided to use wood patterned paper. 

 

Then, I started gluing in some of the floors. D'oh! I totally flaked on my plan, and used the bathroom floor in the kitchen, and the kitchen floor in the bathroom. Which will be fine.

 

 

The kit has four interior doors: 2 on the ground floor, 2 on the second floor. I will only be using the doors on the second floor. I see no purpose in doors between the hallway and living room and kitchen. Pictured above, the blue doors are the front doors. The trim on the right will be painted and glued to them. The white (actually buttercream) doors with the tiny brass knobs will be for the bedroom and bathroom. 

 

Kitchen floor

 

Hallway floors

 

Bathroom floor.

 

One reason I'm sorry that I switched the papers for the kitchen and bathroom is that I used the same papers respectively for the haunted Fairfield. I kinda wanted to change it up for this house. Well, for now I'm leaving it.

 

The color scheme for the exterior of this house is similar to the way my father had his house painted last: Cream colored, with bright blue doors and chocolaty brown trim. To match his beloved and ancient Siamese cat.

 

One problem I'm having with this kit is that some of the sheets of wood are warped, due to the way the kit was shrink-wrapped at the factory. I think I can overcome this. I hope.

 

 

The floors will get coats of either Mod Podge or polyurethane. I'm also working on a shabby chic ambience with this house (that makes it sound fancy, when in reality we're just shabby).

Stash of half scale furniture

I have a box of half scale furniture. Most of it from Ebay. I've used almost all the pieces I inherited from Mom, in the Fairfield.

This is what I've got:

Please ignore my messy desk background. The wicker chaise and the gold metal chairs will go on the rooftop garden. The bookcase is destined for living room. The baker's rack will be in the kitchen; The piano will go in the living room as well as the violin and music stand. The armchair will go in the living room.

Tonight I painted two interior doors. The kit actually has 4 interior doors, but I'm leaving the doors off the downstairs.

Undersized Urbanite 2014 - Half scale Van Buren

This is the start of my project. It's a half-scale Van Buren, and these are the floors and partitions.

This house will be casual, comfy: Grandma's Summer House.

Ground floor, hallway, kitchen and living room.

Second floor, hallway, bathroom, Grandma's bedroom.

Third floor, guest room.

Rooftop garden/sitting area.

I'm modeling it after the feeling and ambiance of my grandmother's house.

A little inside information...

The Fairfield is mostly decorated; I still have some minor additions/changes to make.

So, room by room:

 

The sitting room: The cabinet is filled with various objets d'art. Some are turnings, by CW Lubin on Etsy. The little gold chairs and the fireplace were my mother's.

 

Dining room: The table and chairs were made by an elderly man, hand-caned, when I was a teenager. His daughter was a friend of my mother's, and Mr. Rhodes had built a fantastic lot of dollhouse furniture for his daughter. My mother commissioned him to build this set in half scale, in particular for this house.

 

I made the corner shelves to fill a gap.

 

Guest bedroom

 

Master bedroom

 

View of this side of the house, first two floors. There's something a little odd about the paintings in this house...

 

 

Third floor: the witch's den.

 

In the middle of the right side of the top floor sits a little round cage. It needs a strange pet inside, and then it will hang from the ceiling. I've yet to figure out what strange pet to put in it.

 

Hallway and bathroom

 

Witch's den, continued. I labeled and filled all the little potion bottles. The brass mortar and pestle on the table are turnings by CW Lubin. The tiny wooden box on the table was a kit I put together.

 

Kitchen: The stove was one my mother had bought for this house. The sink unit was a kit I bought from Petite Properties, in England, as was the little wall cupboard. I made most of the food items stocking the pantry. The green rocker was from a kit. I do still need more grocery items, and will be working on those off and on.

 

Slightly better view of the sink.

 

 

It's kind of interesting the way photos show what needs to be added or what looks cluttered or what needs to be fixed. That is, more so than just looking at the rooms.

 

 

I will find/make tiny birds (or something similar) to put on the outside windowsills, and in the tree. The project is also needing some snakes, and some mice. Some of the doorknobs need to be re-glued, too. Of course, a dollhouse is never really finished.

 

Landscaping, adding details

Working on the haunted Fairfield, now that Spring Fling is over and I've got the tree I needed.

To begin, the outside:

 

The fencing is up. The pillars are made of cardboard, taped into a column shape, and painted gray. I dry-brushed black on them as well, to give more of a concrete/cement look. I was rather sad to discover that the gray textured paint I used for the foundation and chimney had dried up. Maybe if I add some water to it, it will be usable again. I don't know.

 

Close up of the pillars and gate ("gate" is a pretty grandiose term for what is actually a small piece of fencing glued into place between two pillars). Each pillar is topped by a gargoyle,

 

In this photo, the glue on the pillar is not quite dry. In a corner of the yard, a skeletal pirate sits and guards his dubious treasure.

 

 

Side yard, view of the tree. The tree was an Ebay find, in a lot of landscaping materials.

 

The gargoyle on the porch roof is from my niece Jessie. The porch flowers are an SDK kit. The statue in the flower patch came from Emerald Rose, in Bristol. The two-headed dragon, in the tree, came from Brown Dog Books in Hinesburg.

 

On the left are two tombstones. I had a lot of trouble getting a photo of these, and that's why so many similar photos are uploaded.

 

The flash of red in the tree is a birdhouse. Again, the tombstones are on the left. I made the tombstones from a piece of packing wrap. I cut the shapes, glued the "stone to the base, painted them gray, painted the inscriptions, and glued them to the yard.

 

Here you get a partial view of the kitchen, and a back view (through the fence) of the tombstones.

 

Close up. You see how the tombstones tend to fade behind the fence in photos.

 

 

Another contest?

I am giving some thought to entering the Undersized Urbanite contest. It started 9/30/13, and goes til May, I think.

I have a project that would do - Regan's workshop. If nothing else, this would help me practice photographing the build. You apparently post photos of the building and decorating process.

I am a bit intimidated at the fantastic houses other folks build. I will try to really take my time with this one. It's a fairly simple premise. I will need to make a ladder/stairs to the second floor. Since the workshop is meant to be quite primitive, I think it will be a very forgiving project.

Plus, I'm hoping to "finish" the haunted Fairfield - I have a tree, which needs a bit of work. That's what I was held up by, the need for a tree.